How to Install a Wireless Keyboard and Mouse
Installing a wireless keyboard and mouse is easy. It should only take about 10 minutes, but possibly longer if you’re not already familiar with how to deal with basic computer hardware. The specific steps you need to take might be a bit different depending on the kind of keyboard/mouse you’re using.
Unpack the Equipment
Installation begins with unpacking all the equipment from the box. If you purchased this as part of a rebate program, keep the UPC from the box. Your product box will probably contain the following items: Wireless keyboard, wireless mouse, wireless receiver(s), batteries (if not, you may have to supply these), software (usually on a CD), and manufacturer instructions. If you’re missing anything, contact either the retailer where you purchased the equipment or the manufacturer. Different products have different requirements, so check the included instructions if you have them.
Set Up the Keyboard and Mouse
Since the keyboard and mouse are wireless, they won’t receive power from the computer like wired ones do, so they require batteries. Turn the keyboard and mouse over and remove the battery compartment covers. Insert new batteries in the directions shown (match + with the + on the battery and vice versa). Place the keyboard and mouse wherever comfortable on your desk. Observe proper ergonomics when you position your new equipment. Making the correct decision now can help prevent carpal tunnel syndrome and tendonitis in the future.
Position the Wireless Receiver
The wireless receiver is the component that physically connects to your computer and picks up the wireless signals from your keyboard and mouse, allowing it to communicate with your system. While the specific requirements vary from brand to brand, there are two considerations to keep in mind when choosing where to position the receiver:
Distance from interference: Keep the receiver at least 8 inches (20 cm) away from sources of interference such as the computer monitor and computer case and other items that may cause interference like fans, fluorescent lights, metal filing cabinets, etc.Distance from keyboard and mouse: The receiver should be positioned somewhere between 8 inches (20 cm) and 6 feet (1.8 m) from the keyboard and mouse. (Many receivers are just small USB dongles. They plug right into the USB port. Don’t worry too much about interference or distance with these.)
Install the Software
Almost all new hardware offers accompanying software that you must install. This software contains drivers that tell the operating system on the computer how to work with the new hardware. The software provided for wireless keyboards and mice differs significantly between manufacturers, so check with the instructions included with your purchase for specifics. Generally, though, all installation software is relatively straightforward:
Connect the Receiver to the Computer
Finally, with your computer turned on, plug the USB connector at the end of the receiver into a free USB port on the back (or front if need be) of your computer case. After plugging in the receiver, your computer will begin to configure the hardware for use. When the configuration is complete, you’ll probably see a message on the screen similar to “Your new hardware is now ready to use.”
Test the New Keyboard and Mouse
Test the keyboard and mouse by opening some programs and typing some text. It’s a good idea to test every key to ensure there are no problems. If the keyboard or mouse doesn’t function, check that there’s no interference and that the equipment is in range of the receiver. Also, check the troubleshooting information probably included with your manufacturer instructions. Remove the old keyboard and mouse from the computer if they’re still connected. If you plan on disposing of your old equipment, check with your local electronics store for recycling information. If your keyboard or mouse is Dell-branded, they offer a free mail-back recycling program (yes, Dell covers the postage) that we recommend you use. You can also recycle them at Staples, regardless of the brand or whether it still works.
